Ubuntu Linux for beginners and experts. An Ubuntu community with support forums and more.

Networking Issue Between Ubuntu PC and Vista Laptop

I have recently installed Ubuntu 10.10 on my old PC to run all my media from. I have installed and run the latest version of Samba and set my Network workgroup to just be "Workgroup". I have setup folders on both machines to shared, and the Ubuntu PC (UbuntuJim) can find and copy files from the Vista laptop (Jim-LaptopM), but cannot edit anything.

On the other hand, while the Vista Laptop can "see" the Ubuntu PC, whenever I attempt to connect I get the following error:

"UbuntuJim" Is Not Set Up To Establish a Connection on Port "File and printer sharing (SMB)" with this computer.

If anyone can assist me with resolving this problem, it would be greatly appreciated. I am a bit new at using Ubuntu and Linux, so it may be a simply error I've overlooked.

mouse choppy with ubuntu 10.10

Hello all,

I just recently switched from windows vista to 64 bit ubuntu 10.10. I'm running it on a R400 thinkpad with 3GB of memory, and integrated intel graphics. I've been very happy with things except the fact that the mouse is very choppy and jumpy. If I start on one side of the screen and smoothly move to the other, the mouse will frequently pause along this track, and "catch up" to where it should be. This happens maybe 2/second. I've tried my trackpad, USB mouse, and the little red dot that lenovo loves.

Any thoughts? I used lshw to show my chipset and saw that there are two entries for the graphics card - one is showing up as UNCLAIMED. There's also a communication module UNCLAIMED.

I'm a newbie - any help'd be great. Thanks.

Ubuntu 10.10 Wireless switched off - can't be switched on and wired - can't access internet

Since installing 10.10 on my Acer Aspire 6530G I can't access the internet when connected with a wired connection and my wireless connection is disabled and can't be enabled.

Can anyone help.

Wireless switched off and can't be switched on

For the second time in a year I have upgraded to a new Ubuntu and lost internet access! And we expect people to drop Windows and flock to Linux??!! I don't think so.

Last time it was my wireless dongle which didn't work.
This time 10:10 it has switched off my wireless and won't let me switch it on again and when I connect by wire it won't connect to the internet!!!

So I have no chance of getting it fixed!!

I find myself wanting to move to Linux completely but I am thwarted at every upgrade!!

Come on guys surely we can keep the things which were working working when there is an upgrade otherwise it's not an upgrade - just another embarrassment.

I'm so glad the people whom I have encouraged to try Linux have not done so - or they would have been put off forever.

Sent from my Windows 7 desktop which seems to work impeccably. Which is even more annoying.

xserver settings changed through command line

I was trying to get my new Panasonic 50” plasma to work as a monitor for an Ubuntu 10.10 installation.
My Gforce 6200 256mb has both VGA and DVI ports out back.
I had the VGA connected to an LCD and the DVI connected via DVI to HDMI cable to the Plasma.

install as only OS

I'm installing 10.10 as the only OS on an older P4 computer. Just 1 gig or RAM and a 40 gig HD. I'm installing from a CD iso file. It has gotten as far as asking for my name and a user name and password, it seems to load most of the files and the progress bar is nearing the end, but just stops. I've no idea what to do. It's my first experience with Ubuntu.

How to see detailed of computer and system information in Ubuntu 10.10 (Maverick) on Graphical tool

In windows you want to see computer and system information there are many methods for Exp:-To see Microsoft System Information, use either of the following methods:

• Click Start, point to Programs, point to Accessories, point to System Tools, and then click System Information.

• Click Start, click Run, type msinfo32.exe in the Open box, and then click OK.

In the same way in Ubuntu system you want to see computer and system information in Graphical Mode you have to install Sysinfo

What is Sysinfo: - Sysinfo is a graphical tool that is able to display some hardware and software information about the computer it is run on.
It is able to recognize information about:

. System (Linux distribution release, versions of GNOME, Kernel, gcc and Xorg and hostname);

. CPU (vendor identification, model name, frequency, level2 cache, bogomips, model numbers and Flags);

. Memory(total system RAM, free memory, swap space total and free cached, active, inactive memory);

magic jack voip

Is there any way to make magic jack work on ubuntu 10.10?

Step by Step guide installing Ubuntu 10.10 on a Windows 7 System (Dual booting)

In my first article that is posted at 29.10.2010 “Installing Ubuntu 10.10 on a Windows 7 System (Dual booting) with Radeon X300/X550/X1050 SERIES Graphics Card”. I got most of email in that most of the people are asked me to give step by step Installation method for Windows 7 and Ubuntu 10.10 in dual booting. So I am trying to give you to installation method for both Operating Systems. I hope it will help to you for easy installation for Windows 7 and Ubuntu 10.10 in Dual booting method.

Full Story

How to install avast anti virus software in ubuntu 10.10 (Maverick)

First you have to download avast anti virus software from avast website
http://www.avast.com/linux-home-edition#tab4
now you will see avast web page called avast Linux home edition
you will see a Note: the program will not work with out a valid license key. To get your key places use the registration form.
You have to click on registration form now you will see a new page called “Register for your free avast 1 year license” in the you have to give full details information to register for free license you will get key to your mail.
Now you have go to avast Linux Edition (DEB Package)
now you will see opening avast 4 workstation_1.3.0-2_i386.deb box
you have to select
(.) open with “Ubuntu software Center (Default)”
press {OK} button
after downloading is over. You will see a box called Ubuntu software Center in that you see Right side a small box called Install
just press that Install Button

How to read local languages (Telugu, Malayalam, Tamil, Devanagari (including Marathi), Gujarati, Bengali, and Gurmukhi) news pap

In Ubuntu 10.10 by default web browser is Mozilla fire fox web browse is using for internet browsing.
If you want to read Telugu and other news paper first you have go to System ---> Administration---> Language Support --> and click it
you will see a box called Language & Text box
It will update automatically when you open Language Support
after update is over you have to go ---> Install/Remove Languages ---> and press it
you will see a new box called installed languages and you can fined 145 languages list
for Exp:- I choose Telugu now you can see four options in the bottom of the box
under components:
1.Translations 2. Spell cheking and writing aid 3.Input methods 4.Extra fonts
click all the boxes
and now press apply changes button
after changes is over now you have to install padma plugging for Fire Fox web browser. For
that you have to open Mozilla fire fox web browser and you go to goole and type padma plunging

Step by Step guide installing Ubuntu 10.10 on a Windows 7 System (Dual booting) With Radeon Graphics Card

In my first article that is posted at 29.10.2010 “Installing Ubuntu 10.10 on a Windows 7 System (Dual booting) with Radeon X300/X550/X1050 SERIES Graphics Card”. I got most of email in that most of the people are asked me to give step by step Installation method for Windows 7 and Ubuntu 10.10 in dual booting. So I am trying to give you to installation method for both Operating Systems. I hope it will help to you for easy installation for Windows 7 and Ubuntu 10.10 in Dual booting method.

I have installed Windows 7 and Ubuntu 10.10 on HP dx 7200 micro towers.
System Information :-
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7201) (7201.winmain_win7ids.090601-1516)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP Compaq dx7200 Micro tower
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz (2 CPUs), ~3.2GHz
Memory: 4096MB RAM
Available OS Memory: 3584MB RAM
Display Devices

NEED HELP!!It showed INSTALL PROBLEM when i want to lock in. How should i solve it?

It still functioning well when i used it last nite i am very sure that i quick it properly. But today when i on my pc it showed "INSTALL PROBLEM" ar the top of right hand site corner. It is like that:
INSTALL PROLEM!
The configuration defaults for Gnome Power Manager have not been installed correctly. Please contact your computer administrator.

At the same time, at the to top of left hand site corner it said that:
An error occurred while loading or saving configuration information for evolution-alarm-notify. Some of your configurations setting may not work properly.

That all it show out when i on my laktop and not even have the chance to type my password and get into the system yet.
So what i going to do to fix this problem as i am totally new in Ubuntu 10.04. I am fresh user. I love the simple and speed of Ubuntu and dont want to change to window now.

Please help me on this problem if you guys know how to fix this. Thanks so much.

How to make your panels, menus, and tabs transparent

I have made a tutorial on how to make your panels, tabs and menus transparent. just visit my site: http://jechem.blogspot.com/2010/11/making-panels-tabs-and-menus.html. There are pictures to help you on the procedures.

No background

For no obvious reaason I have lost my background. If I go to change background and pick a background, it comes up, but after a few minutes disappears.

Can anyone tell me why and how to cure this problem.