Ubuntu Linux for beginners and experts. An Ubuntu community with support forums and more.

Ubuntu install freezes after i select my keyboard

I installed Ubuntu to my Flashdrive through Windows 7(-_-) and I ran it using that. When ever i install, I select my keyboard and the installer freezes. I am currently running Ubuntu off of my flashdrive (V 10.04 i think)
Any help?

How to install Dual Boot Ubuntu 10.10 and Windows sp3 with NVIDIA GeForce FX5500 Graphic Card

I have P4 system in my home and system configuration is

BIOS: Mother Board version ZX-865v v1.0 (2009-04-22-4m)
Processor: Intel(R) Pentium(R) CPU 2.40 Ghz
Memory: 1024 MB RAM


Name: NVIDIA GeForce FX 5500
Manufacture: NVIDIA
Chip Type: GeForce FX 5500
DACType: Integrated RAMDAC
Approx Total Memory:256.0MB
Current Display mode: 1024X768(32bit)(60HZ)
Monitor: Plug and Play monitor
and in that system i have SAM SUNG HD321Hj hard disk of 320GB and made three partitions (C D E) in that i have installed xp with sp3 in C & D partitions and in E partition I installed Ubuntu 9.10.

in this month Ubuntu 10.10 was released and i tried to install Ubuntu 10.10 on my system. Installation was not done because of NVIDIA Graphic Card, as this card supports only windows vista and xp. Ubuntu is a free and open source software and so it will not support NVIDIA Graphic card. This is where the problem lies

Installing real player

unable to install real player. help requested.

Installation of webcam

i own a iball face2face webcam. i m unable to install it. request all to plz help regarding this. i m very very new to UBUNTU and need help.

unable to connect to wi-fi with a new 10.04 Ubuntu install

Greetings to all. I love Linux, no more Redmond on my Acer extenda 5420 laptop. All is great except my inability to connect via wi-fi. The internal "card" is a Broadcom b43 series. I am willing to do an end run by using a PCMCIA card if anyone can suggest one that would work "out of the box." Any help is appreciated. Thanks everyone. Hank

Linux finally gets a great audio tagger

As someone that loves music, listens constantly and is always adding to my collection by purchasing and then ripping CDs, a decent tag editor is an essential tool. I’ve been using Linux for the past seven years or so and the only drawback that I was constantly faced with was the lack of a great audio tag editor - basically a Linux based equivalent to mp3tag.

Full Story

Ubuntu Server

I need some help.

I'm trying to get my own web server running. I installed Ubuntu Server and followed

My sites need:

Server Requirements

* Linux Server (Ubuntu).
* Apache Web Server
o Support for AcceptPathInfo
o Support for MultiViews (or mod_rewrite which is slower)
* MySQL 5.x
* PHP 5.x (mod_php/CGI)
o Support for GD2 Library
o Support for MySQL
o Support for Curl
o Support for uploadprogress PHP extension (only if you want to display a progress bar on uploads)

Recommended PHP Configuration
o safe_mode off
o open_basedir off
o max_execution_time 7200
o max_input_time 7200
o memory_limit (with 1MB more then the maximum video upload size)
o post_max_size (maximum video upload size)
o upload_max_size (maximum video upload size)
o exec() should be allowed

Unable to lock the administration directory

Receiving the following error when trying to install gimp:

E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied)
E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?

I am fairly new to Ubuntu and understand a Synaptic process is running. How can I tell in the System Monitor which is a Synaptic process.

This is on 10.10.

Ubuntu 10.10 is out! Get it now!

You can download the brand-new Ubuntu 10.10 „Maverick Meerkat“ here:

MFC5840CN scanner no device available supported devices are busy

Still [not sure where to post this and] working on getting this scanner to work in Ubuntu but now 10.10. I upgraded my 9.04 via internet to 10.10 a few days ago. I've had the drivers and supporting files installed for a while (9.04) yet Xsane gives me the message that no device available supported devices are busy. I've even removed xsane to see if sane might do the job. Yea sane and xsane are both in there. I recently did a lsusb command and got this response in brackets below:
[????????@????????-desktop:~$ lsusb
Bus 002 Device 002: ID 04f9:016e Brother Industries, Ltd MFC-5840CN Remote Setup Port
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
drmike@drmike-desktop:~$ '/usr/share/applications/gnome-screenshot.desktop']

Scribus text box doesnt work

Using Ubuntu 10.04.1 with Scribus (stable) loaded from the Software Centre I have a problem. the text box doesn't work. I create a text box, click on the "Edit Contents of Frame" icon and get a cursor in the text box but all I can type in are figures. In just doesn't type letters. Obviously this is not a lot of use for a publisher programme. Is this a known bug and can it be fixed? if not anyone recommend a publishing programme that works in Ubuntu?

listview objects change background color when moving mouse over them

I have installed 10.04 release. In nautilus when folder visualization is in list mode, list's cells background color change randomly as I pass the mouse over them. Same effect I see using gedit.
In previous version 9.10 on the same machine all was working fine.
Can some body help me, please?

NOTE. My graphic card is a S3 ProSavage KM133 and the mouse is a simple USB mouse "Trust" on a 1.1 usb port.
Thank you in advance.

Putting Repository DVD's on sources.list

I ordered eight DVD's with Ubuntu 10.4,
and now I can not add them to the sources.list, can you help please?

Thanks in advance for the help.


How to install libreoffice in Ubuntu using PPA

LibreOffice is a productivity suite that is compatible with other major office suites, and available on a variety of platforms. It is free software and therefore free to download, use and distribute.

Full Story

Computer issues.

Computer beeps once, screen goes blank and then a repeating clicking sound begins. The only way to stop this is to power off.

Syndicate content